ATM COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
25
atm cac overbooking
Configure ATM overbooking parameters.
SYNTAX:
atm cac overbooking [rt = <number{0-1000}>]
[nrt = <number{0-1000}>]
where:
rt The realtime overbooking percentage. OPTIONAL
nrt The non-realtime overbooking percentage. OPTIONAL
To Next Page
Loading...
