Technicolor TG582n Cli Reference Guide

UPGRADE COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
795
upgrade image list
List images
SYNTAX:
upgrade image list [maxage = <number{60-999999}>]
[writemode = <{full|natonly|readonly}>]
[safenat = <{disabled|enabled}>]
[preferredaddresses = <string>]
[upnpautosave = <{disabled|enabled}>]
[dslfautosave = <{disabled|enabled}>]
[autosavedelay = <number{30-45}>]
[onlydefault = <{disabled|enabled}>]
where:
maxage ssdp advertisements MAX-AGE (default = 1800) OPTIONAL
writemode Configuration access level for UPnP OPTIONAL
safenat Enable / disable check on safe nat entries (limited to own
host)
OPTIONAL
preferredaddresses CSV list of preferred ip addresses for UPnP (1 per lan ip-
interface)
OPTIONAL
upnpautosave Enable / disable upnp auto save OPTIONAL
dslfautosave Enable / disable TR-064 auto save OPTIONAL
autosavedelay Auto save delay time (sec) OPTIONAL
onlydefault Only advertise the default WAN connection OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+