Technicolor TG582n - Eth Bridge Filter Ifdel

ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
321
eth bridge filter ifdel
Remove an interface from a filter.
SYNTAX:
eth bridge filter ifdel brname = <{bridge}>
name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
where:
brname The name of an bridge. REQUIRED
name The name of the filter to configure. REQUIRED
intf The name of the bridge interface to remove. REQUIRED