ATM COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
39
atm oam config
Modify the ATM OAM settings.
SYNTAX:
atm oam config [clp = <number{0-1}>]
[loopbackid = <string>]
where:
clp The CLP bit value of the OAM cells. OPTIONAL
loopbackid The loopback id (hexadecimal string) for processing of
segment loopback cells.
OPTIONAL
To Next Page
Loading...
