Technicolor TG582n - Wansensing Debug Traceconfig

WANSENSING COMMANDS
812
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
wansensing debug traceconfig
Tracing settings
SYNTAX:
wansensing debug traceconfig [state = <{disabled|enabled}>]
where:
state Enable/disable OPTIONAL