Technicolor TG582n Cli Reference Guide

ETH COMMANDS
340
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth bridge macadd
Add a static MAC address to a bridge interface.
SYNTAX:
eth bridge macadd [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
hwaddr = <hardware-address>
[vlan = <{default}>]
where:
brname The name of a bridge instance. OPTIONAL
intf The name of the bridge interface. REQUIRED
hwaddr The ethernet MAC address of the new entry. REQUIRED
vlan The VLAN. OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+