STATECHECK COMMANDS
752
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
statecheck list
List checks.
SYNTAX:
statecheck list [activate = <{disabled|enabled}>]
[timeout = <number{0-60}>]
[format = <{standard|welf}>]
where:
activate Syslog send to collectors enabled. OPTIONAL
timeout Syslog flooding timeout (in secs) to collectors. OPTIONAL
format Syslog contents format OPTIONAL
To Next Page
Loading...
