Technicolor TG582n Cli Reference Guide

MOBILE COMMANDS
642
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
mobile ifconfig
Configure an Mobile interface.
SYNTAX:
mobile ifconfig intf = <>
[pin = <password>]
[puk = <string>]
[apn = <string>]
[mode = <{automatic|manual}>]
[operator = <number{0-99999}>]
[technology = <{2G|3G}>]
[initcommand = <string>]
where:
intf The name of the Mobile interface to configure. REQUIRED
pin PIN code. OPTIONAL
puk PUK code. OPTIONAL
apn Access Point Name. OPTIONAL
mode Operator selection ( automatic, manual). OPTIONAL
operator Location area indentifier + network code. OPTIONAL
technology Radio access technology ( 2G, 3G). OPTIONAL
initcommand AT command executed after SIM verification. OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+