SYSTEM COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
763
system Commands
system config Set or change system config parameters. see page 764
system debug autosave Autosave debugging commands see page 765
system debug cpu CPU usage statistics see page 766
system debug mem Memory usage statistics see page 767
system dst Set daylight saving values see page 768
system flush Flush system configuration. see page 769
system ra config Configure remote access parameters. see page 770
system ra instadd Add a remote access instances. see page 771
system ra instdelete Delete remote access instances. see page 772
system ra list List remote access instances. see page 773
system ra start Starts temporary mode. see page 774
system ra stop Stops temporary mode. see page 775
system reboot Reboot the modem. see page 776
system reset Reset to (factory or ISP) defaults: user specific
settings will be cleared !
see page 777
system timedreboot Set or change editing mode timed reboot see page 778
To Next Page
Loading...
