Technicolor TG582n Cli Reference Guide

DYNDNS COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
287
dyndns modify
Modify a dynamic DNS client.
SYNTAX:
dyndns modify name = <>
[intf = <{Internet}>]
[user = <string>]
[password = <password>]
[group = <>]
[mx = <string>]
[backmx = <{disabled|enabled}>]
[wildcard = <{disabled|enabled}>]
[offline = <{disabled|enabled}>]
[service = <{dyndns|statdns|custom|No-IP|
DtDNS|gnudip}>]
[status = <{disabled|enabled}>]
[trace = <{disabled|enabled}>]
where:
name The dynamic DNS client name. REQUIRED
intf The dynamic DNS client interface. OPTIONAL
user The username for dynamic DNS authentication. OPTIONAL
password The password for dynamic DNS authentication. OPTIONAL
group The dynamic DNS host group. OPTIONAL
mx The mail exchanger. OPTIONAL
backmx Set up the mail exchanger as a backup MX. OPTIONAL
wildcard Allow use of hostname wildcards. OPTIONAL
offline Set the host to offline mode. OPTIONAL
service The dynamic DNS service. OPTIONAL
status Enable/Disable the dynamic DNS client. OPTIONAL
trace Enable/Disable the verbose console logging for the dynamic
DNS client.
OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+