Technicolor TG582n - Eth Bridge Vlan Ifconfig

ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
353
eth bridge vlan ifconfig
Modify bridge interface from virtual LAN.
SYNTAX:
eth bridge vlan ifconfig name = <{default}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
untagged = <{disabled|enabled}>
where:
name The VLAN name. REQUIRED
intf The bridge interface from the VLAN to configure. REQUIRED
untagged Enable/disable interface as untagged for this VLAN. REQUIRED