Technicolor TG582n Cli Reference Guide

ETH COMMANDS
320
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth bridge filter ifadd
Connect an interface with a filter.
SYNTAX:
eth bridge filter ifadd brname = <{bridge}>
name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
where:
brname The name of an bridge. REQUIRED
name The name of the filter to configure. REQUIRED
intf The name of the bridge interface to add. REQUIRED

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+