NAT COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
647
nat Commands
nat config Modify global NAT configuration. see page 648
nat flush Flush current NAT configuration. see page 649
nat iflist Display all interfaces. see page 650
nat mapadd Add an address mapping to a nat enabled
interface.
see page 651
nat mapdelete Delete an address mapping from a nat enabled
interface.
see page 652
nat maplist Display address mappings. see page 653
nat tmpladd Add an address mapping template. see page 654
nat tmpldelete Delete an address mapping template. see page 655
nat tmplinst Instantiate address mapping templates for a
given dynamic address.
see page 656
nat tmpllist Display address mapping templates. see page 657