Technicolor TG582n Cli Reference Guide

PPTP COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
679
pptp ifadd
Adds a PPTP profile (backwards compatible with previous release, use profiles
SYNTAX:
pptp ifadd dest = <string>
[rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
To enable/disable LPD service. = <{never|
always|keep}>
where:
dest The WAN destination for this PPTP tunnel. Typically a
phonebook name.
REQUIRED
rate Transmit speed in kbits/s for the WAN link. OPTIONAL
encaps The WAN protocol encapsulation. OPTIONAL
ac Enable/disable sending address and control field (0xFF03)
on the WAN link.Command: printersharing LPD config
OPTIONAL
To enable/disable LPD service. Syntax : config [state = <{disabled|enabled}>] REQUIRED
SYNTAX:
pptp ifadd [state = <{disabled|enabled}>]
where:
state Enabled/disabled LPD printer service. OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+