ATM COMMANDS
26
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
atm debug aal5stats
Display AAL5 port specific atm statistics.
SYNTAX:
atm debug aal5stats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[clear = <{disabled|enabled}>]
where:
port The port number for which statistics will be retrieved. REQUIRED
vpi The VPI number for which statistics will be retrieved. REQUIRED
vci The VCI number for which statistics will be retrieved. OPTIONAL
clear Clear the statistics after request. OPTIONAL