Technicolor TG582n Cli Reference Guide

ETH COMMANDS
392
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth ifconfig
Modify an ETH interface.
SYNTAX:
eth ifconfig intf = <{ethoa_8_35}>
[dest = <{bridge|ethoa_8_35}>]
[retry = <number{0-65535}>]
[wan = <{disabled|enabled}>]
[priotag = <{disabled|enabled}>]
[vlan = <{default}>]
where:
intf The name of the ETH interface to configure. REQUIRED
dest The destination interface for this ETH interface. OPTIONAL
retry The number of times the ETH connection setup should
retry before giving up.
OPTIONAL
wan Enable/Disable WAN for this ETH interface. OPTIONAL
priotag Enable/Disable VLAN priority tagging. OPTIONAL
vlan The VLAN for this ETH interface. OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+