IP COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
505
ip Commands
ip arpadd Add an entry to the ARP cache of a broadcast IP
interface.
see page 507
ip arpdelete Delete an ARP entry. see page 508
ip arplist Display the ARP cache. see page 509
ip auto debug traceconfig Modify autoIP trace configuration see page 510
ip auto flush Flushes autoIP interfaces. see page 511
ip auto ifadd Creates a new autoIP interface. see page 512
ip auto ifattach Select and assign a link-local address to an
autoIP interface.
see page 513
ip auto ifconfig Configures an autoIP interface. see page 514
ip auto ifdelete Deletes an existing autoIP interface. see page 515
ip auto ifdetach Release the link-local address for the given
autoIP interface.
see page 516
ip auto iflist Shows the autoIP interfaces. see page 517
ip config Display/Modify global IP stack configuration. see page 518
ip debug httpprobe Send HTTP probe to measure the round trip
time taken to connect and access
see page 519
ip debug sendto Send UDP packets. see page 520
ip debug stats Display statistics. see page 521
ip debug traceconfig Display/Modify IP stack trace configuration. see page 522
ip flush Flush all static IP parameters. Dynamic info (e.g.
from PPP links) remains.
see page 523
ip ifattach Attach an IP interface. see page 524
ip ifconfig Modify an IP interface configuration. see page 525
ip ifdelete Delete an IP interface. see page 526
ip ifdetach Detach an IP interface. see page 527
ip iflist Display all IP interfaces. see page 528
ip ifwait Wait for a status change of an IP interface. see page 529
ip ipadd Assign an IP address to an IP interface. see page 530
ip ipconfig Modify an IP address configuration. see page 531
To Next Page
Loading...
Need help?
General
