Technicolor TG582n Cli Reference Guide

FIREWALL COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
451
firewall rule debug clear
Clear rule statistics.
SYNTAX:
firewall rule debug clear [chain = <chain name>]
[index = <number>]
Show the current routes in the grp routing
table. = <number>
where:
chain The name of the chain. OPTIONAL
index The index of the rule in the chain.Command: grp rtlist OPTIONAL
Show the current routes in the grp
routing table.
Syntax : rtlist [dst = <ip-address>] [dstmsk = <ip-mask(dotted
or cidr)>]
REQUIRED
SYNTAX:
firewall rule debug clear [dst = <ip-address>]
[dstmsk = <ip-mask(dotted or cidr)>]
where:
dst The destination IP address using this route. Supports ip/
mask notation.
OPTIONAL
dstmsk The destination IP address mask. OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+