Technicolor TG582n - Pwr Debug Traceconfig

PWR COMMANDS
704
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
pwr debug traceconfig
Enable/disable the ECO manager traces
SYNTAX:
pwr debug traceconfig [state = <{disabled|enabled}>]
Add line to script. = <{disabled|enabled}>
where:
state enable/disable the ECO manager tracesCommand: script
add
OPTIONAL
Add line to script. Syntax : add name = <string> [index = <number>] command =
<quoted string>
REQUIRED
SYNTAX:
pwr debug traceconfig name = <string>
[index = <number>]
command = <quoted string>
where:
name Name of script. REQUIRED
index Line number (0 = add). OPTIONAL
command Command. REQUIRED