Technicolor TG582n - Eth Bridge Vlan Ifadd

ETH COMMANDS
352
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth bridge vlan ifadd
Add bridge interface to virtual LAN.
SYNTAX:
eth bridge vlan ifadd name = <{default}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
[untagged = <{disabled|enabled}>]
where:
name The VLAN name. REQUIRED
intf The name of the bridge interface to add to the VLAN. REQUIRED
untagged Enable/disable interface as untagged for this VLAN. OPTIONAL