ATM COMMANDS
28
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
atm debug portstats
Display port specific atm statistics.
SYNTAX:
atm debug portstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
[clear = <{disabled|enabled}>]
where:
port The port for which statistics will be retrieved. REQUIRED
clear Clear the statistics after the request. OPTIONAL
To Next Page
Loading...
