Technicolor TG582n - Mlp Debug Traceconfig

MLP COMMANDS
620
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
mlp debug traceconfig
Modify mlp trace settings.
SYNTAX:
mlp debug traceconfig [trace = <{disabled|enabled|full}>]
where:
trace Select mlp trace level. OPTIONAL