LANGUAGE COMMANDS
584
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
language delete
Delete one or all language archives.
SYNTAX:
language delete [file = <string>]
[all = <{yes|no}>]
Display the registered enumtypes = <{yes|no}>
where:
file Filename : name of language archive to delete OPTIONAL
all Deletes all languages archives.Command: mbus listenums OPTIONAL
Display the registered enumtypes Syntax : listenums [dmtree = <{igd|atomic|system}>] [name =
<quoted string>] [expand = <{disabled|enabled}>]
REQUIRED
SYNTAX:
language delete [dmtree = <{igd|atomic|system}>]
[name = <quoted string>]
[expand = <{disabled|enabled}>]
where:
dmtree Select mbusd datamodel tree. OPTIONAL
name Filter enumtypes by (part of) the name OPTIONAL
expand Details enabled/disabled OPTIONAL