MBUS COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
591
filter The filter should be formatted as '(operator operand
operand)'. Possible operators are ==, !=, <, <=, >, >=, and,
or, not. The left operand is a parameter name. The right
operand is a parameter value. For boolean operators the
operands are filters. Example: '(== Name eth0)'.
OPTIONAL
path Fully qualified mbus path OPTIONAL
flags Client command data flags OPTIONAL
accesslist Comma separated names of accessrights groups OPTIONAL
action Type of accessright action OPTIONAL
modifier Accessrights modifier OPTIONAL
replytype Type of accessrights reply OPTIONAL
attribute Requested attribute-type OPTIONAL
timing Print duration of command invocation (default=disabled) OPTIONAL
no_output Discard the output of the command (default=disabled) OPTIONAL
To Next Page
Loading...
