6.4.2 Subtitle language
You can display teletext and DVB subtitles on your DVB receiver. As long as the language
defined is being broadcast, these will be automatically displayed.
If no subtitle language has been selected or there is no broadcast in the selected language,
subtitles can be manually switched on. This is indicated by the message.
6.4.3 Dolby Digital
Certain films are broadcast in Dolby Digital format. This will be indicated in the info window by
the Dolby symbol after a programme has been selected.
If you have a Dolby Digital 5.1-channel amplifier, you can enjoy certain movies in 5.1-channel
Dolby Digital sound, where broadcast.
The only requirement is that the Audio Out Digital digital output on your DVB receiver
must be connected to the digital input of your Dolby Digital 5.1-channel amplifier.
If the Dolby Digital is switched on, such broadcasts will be automatically shown in Dolby
Digital format.
If the function is switched off, the Dolby Digital sound can be switched on manually.
6.4.4 AV synchronisation
> Use the left/right arrow buttons to set the AV synchronisation so that the picture
and sound are synchronised with one another.
6.4.5 HDMI sound format
> Use the left/right arrow keys to select this item and set the HDMI output sound
format to PCM or Bitstream (there is no volume control option).
6.5 Antenna setting
The following settings can be made in this submenu:
6.5.1 Multytenne
If the receiver is being operated in conjunction with a Multytenne LNB, you can use this menu
item to adjust the switching positions automatically to the Multytenne LNB.
6.5.2 Switching DiSEqC on/off
DiSEqC (Digital Satellite Equipment Control) is a digital control signal for controlling DiSEqC
compatible components via the antenna cable.
If your external unit is equipped with DiSEqC components, you must switch the DiSEqC
controlling function on.
6.5.3 Setting the switching matrix
The menu lists the four switching criteria for DiSEqC control. You receiver is pre-programmed
so that ASTRA 19.2° East is received on switch setting A/A and Eutelsat 13.0° East is
received on setting B/A on a multi-switch.
If the switching matrix of your receiving device is set up differently, or if you are receiving
different satellites, you can adjust your digital receiver settings to those of the receiving
device as follows.
To Next Page
Loading...
Need help?
General