6.6.5.3.2 IP address
If the DHCP function is set to Static or DHCP server, the IP address must be
configured manually.
> Use the numeric keys to enter the corresponding digits.
6.6.5.3.3 Subnet mask
You need to configure the subnet mask manually if the DHCP function has been set to Static.
> Use the numeric keys to enter the corresponding digits.
6.6.5.3.4 Gateway
> Use the numeric keys to enter the corresponding digits.
6.6.5.3.5 DNS server 1 / DNS server 2
> Use the numeric keys to enter the corresponding digits.
6.6.5.4 Exiting WLAN network settings
The following options exist for exiting the WLAN network settings menu:
> Press the green function key (Accept). The changes
made will be saved, and you will be returned to the Special functions menu.
Alternatively:
> Press the Return button.
A request appears asking whether the changes you made should be accepted.
> Use the right/left arrow keys to highlight Yes if you want to save the changes or
No if you want to discard them.
> Confirm your selection by pressing OK.
Alternatively:
> To return directly to normal mode without accepting the changes, press the Menu button.
6.6.6 Remote access
The Remote Access function enables you to access the receiver from e.g. a PC via a local
network or via the Internet and set, edit or delete timers.
If remote access will only be used via a local network, all you need to do is activate it as in
this section and enter a password.
If you also want to be able to use remote access via the Internet, you will also need a user
account with a DNS service; the Dynamic DNS Service, Hostname and Username items must
then be selected and/or entered as well.
Pay careful attention to the DNS service’s instructions for remote access via the Internet and
the instructions for the modem or router for accessing the Internet.
> Use the up/down arrow keys to highlight the Remote access item.
> Open the Remote access menu by pressing OK.
6.6.6.1 Switching on Remote access
> Use the up/down arrow keys to highlight the Remote access item.
> Use the right/left arrow buttons to switch the function off.
23
ENCZSKPLHURU
To Next Page
Loading...
Need help?
General