7 Operating the unit
7.1 Switching on
> Switch the digital receiver on by pressing the On/Stand-by button either on the
receiver panel or on the remote control.
7.2 Selecting the user
If the user-dependent parental control (children’s viewing time account) is activated, the user
profile selection screen appears after switching on.
> To make a selection, use the up/down arrow keys to highlight the user profile
you want.
To the right next to the profile selection you will now see the current status (e.g. the
remaining viewing time for the current day).
> Confirm by pressing the OK button.
If the PIN request for this profile has been deactivated, the TV picture now appears. If it
has been activated, the PIN request screen now appears.
> Enter your user PIN using the numeric keys.
If you have entered it correctly, the TV picture now appears.
> If you want to change the user profile during operation, you must first switch the
receiver off by pressing the On/Stand-by button, then press the button again to switch
it back on, calling up the user selection screen again.
7.3 Switching off
> Press the On/Stand-by key either on the receiver panel or on the remote control to
switch the receiver off again.
> The receiver is now in ready mode (stand-by). This means that the time is displayed in
the receiver’s display panel (if activated).
If the time is not displayed, this still needs to be acquired by the receiver. To do this,
switch the receiver on and receive a channel (e.g. ZDF) for approx. 30 se conds to
acquire the time automatically.
7.4 Selecting a channel
7.4.1 Using the channel up/down keys
> Use the up/down arrow buttonson the receiver to select a channel, or use the
Channel +/- buttons on the remote control to scroll up or down the channel settings.
7.4.2 Using the numeric keypad
> Use the numeric keypad to enter the number of the channel you want.
For example:
1 for channel slot 1
1, then 4 for channel slot 14
2, then 3, then 4 for channel slot 234
1, then 5, then 6 then 7 for channel slot 1567
25
ENCZSKPLHURU
To Next Page
Loading...
Need help?
General