Version: 1.06 109
If the weight is smaller than 1 (0.1, 0.2, …) be sure the Target Tag is of type
‘Float’.
Example: counting water consumption
- you receive pulses each 10 liters
- you want to count each 100 liters
- you want to display the result in m³
Dividor: 10
Weight: 0.1
16.1. Processor time for executing High Speed Tag
This table shows the time needed by the processor to compute the High Speed Tags
according to the frequency of the pulses, the type of the Target Tag and quantity of High
Speed Tag.
Frequency of pulses
Target Tag 0 Hz 25 Hz
1 x DIV 24 µs 64 µs
8 x DIV 90 µs 420 µs
1 x AIV 24 µs 220 µs
8 x AIV 90 us 1460 us
To Next Page
Loading...