Version: 1.06 41
8. RTU properties
Setting the properties of the TB
OX
MS has never been so easy thanks to a set of
comprehensive dialog boxes, available from the main tool bar.
The RTU properties are divided into:
• General the type of the RTU, telephone number, size of the chronologies, …
• Drivers configuration of external software modules written in ‘C’, used to
execute specific task or to communicate with other protocol than
standard ones.
• Info to type any info about your program, its different versions, …
• Advanced for some features, some advanced parameters are available: for
alarms, sampling tables, …
RTU properties can be accessed
easily by clicking this icon.
Communication ports are configured from the
‘Resources’.
General TCP/IP configuration is done from the
‘Workspace’ and folder IP parameters.
To Next Page
Loading...