Techno Trade TBOX MS - Deactivating Protection

Version: 1.06 115
17.4. Deactivating protection
There are two methods of deactivating TB
OX MS access protection:
Global reset (see chapter 6.5)
The first method is by performing a global reset, which must be done on site. When the
program has stopped, the local port is no longer protected.
Sending an unprotected TWinSoft document
The second method involves modifying the TWinSoft document and deactivating the Access
Security option. The document must then be sent to the TB
OX MS after having done a
Login as 'Engineer'.
If a card ‘modem’ has been declared protected, it
will still be protected even after a global reset. To
deactivate protection, an unprotected TWinSoft
document must be sent to TB
OX MS (see below).