Version: 1.06 48
8.5.4. Temperature
For Temperature analog input (PT100 or PT1000), you can define a unit: Celsius,
Fahrenheit or Kelvin.
8.5.5. Remote Tags
Reset the device Trigger only if success When communicating as ‘Master’ using
‘Remote Tags’, a Trigger is associated to the device the RTU
communicate with (see Remote Tags).
This Trigger activates the communication according to a ‘State’ or
‘Edge’. Working with ‘Edge’, the RTU restores automatically the
Tag after the transaction(s).
- With this option active:
the Trigger is restored only when communication has been
done successfully.
- Without this option: the Trigger is restored when all Remote Tags associated to the
device have been executed, with or without error.
8.5.6. TCP/IP
The unit is the same for all inputs
To Next Page
Loading...