Version: 1.06 43
OS version: when working Offline, it is the OS used to simulate the compilation.
By default it is the OS version associated to version of TWinSoft.
Telephone number: Configuration used by TWinSoft when it needs to dial TB
OX
MS.
Sizes: Number of records of Digital and Analog chronologies. The
chronologies are the ‘on event’ method of recording data in TB
OX
MS
(see chapter 13
: Data logging
).
Enter a number between 0 and 4000 (Default=100).
Time zone: The Time Zone where the TB
OX
MS is installed.
This information is used to create the time stamps when retrieving data
from TB
OX
MS according to its location. TB
OX
MS uses Universal
Coordinated Time (UTC) as internal time stamp. The conversion is carried
out when retrieving the data.
Summer/Winter: Allows automatic management of winter/summer time. This
selection has to be made according to the location where the TB
OX
MS is
installed.
See Appendix B :
Time in the RTU
8.2. Drivers
A driver is a module written in ‘C’ that executes a specific task, non-standard. Typically, it is
communication to equipment not supporting standard protocol of TB
OX
MS.
There is no driver at the moment.
8.3. Security
Access security is discussed at chapter 17.
To Next Page
Loading...