Techno Trade TBOX MS - Adding a GSM; GPRS Card

Version: 1.06 57
Outside line prefix: if TB OX MS is placed behind a telephone switch (PABX), it is the
number to get the outside line. This prefix will be applied
automatically each time TB
OX MS dials out.
Auto Answer: Number of rings after which the modem will go off hook.
 Tab DCV: Digital Communication Variables
Special variables with a pre-defined function (communication error, modem online,
…) (see chapter 9.3).
 Tab ACV: Analog Communication Variables
Special variables with a pre-defined function (time-out, user ID, …) (see chapter 9.3).
 Tab Advanced
Mainly ‘timing’ parameters required when modem is ‘Master’ or ‘Slave’ in a ModBus
communication.
9.2.3. Adding a ‘GSM / GPRS’ Card
In addition to configuration described here above, a GSM modem can be used in 2 modes:
 as a GSM data modem
 in GPRS mode
In addition to standard modem
configuration, some parameters
are specific to GSM.
The main option ‘GPRS’
determine the working mode of
the card:
GSM data OR
GPRS
Default Initialization and prefix can be modified from the file
‘ModemProfiles.xml’.
Changes will be applied to all new document created.