Version: 1.06 76
11. IP Parameters
IP parameters consist in the global configuration for:
connecting to an ISP
sending files (FTP)
sending e-mail (SMTP)
Time synchronization (NTP)
All IP parameters
are defined in this
Folder, available from
the ‘Resources’.
The FTP Host, SMTP Server and NTP configurations correspond to connections to the
appropriate servers. It is done for once, and called when creating a recipient of alarms.
This makes creating alarm recipients very easy !
Example with alarm for sending e-mail:
The Recipient is an ‘e-mail’ address which refers to a SMTP server.
This SMTP server refers to an ISP
In other way round, when TB
OX
MS
generates an e-mail, it sequences the configuration like
following:
connection to an ISP connection to a SMTP Server sending to a recipient (e-mail
address)
Concerning IP configuration of Ethernet card, refer to
the corresponding card in the ‘Resources’.
Concerning IP configuration for incoming calls
(WebServer), see advanced RTU properties TCP/IP
To Next Page
Loading...