Version: 1.06 93
12.5. Group of Recipients
A group of recipients is composed of several recipients, which can be of different types
(SMS, e-mail, …).
You can declare several groups.
Then previous to creating groups of recipients, you have to create the recipients (see
above).
You can then associate an Alarm condition to a ‘recipient’ or a ‘group of recipients’.
Working with groups of recipients offers 2 possibilities:
1. You select the option ‘Call all recipients’:
the alarm is sent to all recipients, one after
each other ( equivalent to the ‘Link’ with previous generation of RTU, the
A).
2. You don’t select the option ‘Call all recipients’:
the alarm is sent to the first one in the list
then if it fails to the second then if it fails to the third …
When it succeeds the sending stops.
( equivalent to the ‘Chain’ with previous generation of RTU, the
A).
To Next Page
Loading...