Techno Trade TBOX MS - RTU Configuration; RTU Properties; Modem and Serial Port Properties

Version: 1.06 111
17.1. RTU configuration
The configuration of security of TB OX MS is available from the ‘RTU properties’:
- there is a general activation of the protection.
- for each serial or modem port, you activate the protection.
17.1.1. RTU Properties
From the RTU properties  tab ‘Security’, you activate the general access security
feature.
Global code type in the code you used to generate the Access Codes with the utility
PASSWORD.EXE (see chapter 17.2 following).
Type it a second time in the Confirmation field, to be sure.
TWinSoft presents you the serial ports (RS232, RS485 and modem) according to your
hardware configuration.
Next, you check the port you want to be protected.
17.1.2. Modem and Serial Port Properties
Access level on serial and modem ports can be checked using the Communication Variables
(see chapter 9.3).