Techno Trade TBOX MS - Saving and Sending a Program

Version: 1.06 36
6.7. Saving and Sending a Program
Like any Windows program, TWinSoft creates ‘Documents’. One document corresponds to
one TB
OX MS application. Each of them must be saved using the Windows standard.
6.7.1. Saving a document
Possibilities for saving a document:
• Use the icon
of the main tool bar
• From the main menu use: ‘File’  ‘Save’
• Use the accelerator keys <CTRL + S>
During the development of the application, it can be sent at any time to TB
OX MS, for
testing the program.
When sending an application to TB
OX MS, it is first compiled and then sent, in the same
sequence.
6.7.2. Compiling a document
Compilation converts the document into microprocessor code. You can execute it:
• Use the icon
of the main tool bar
• Use the accelerator key <F9>
The result of the compilation is available in the Results window. This windows
automatically pops up when there is a problem but it can be opened manually:
• from the main menu: ‘View’  ‘Results’
• using the accelerator keys <ALT + 2>
The Results window provides useful data:
Information: indicated in black
Warning: indicated in bold dark green
Error: indicated in bold red
Test of memory still available
The result window also displays memory still available:
CPU ROM: Application RAM: Application RAM: Databases
CPU-16 Max. 32768 bytes Max: 32768 bytes Max. 73728 bytes
CPU-32