Version: 1.06 61
About sending alarms with GPRS
With GPRS, you are able to send e-mail or files using FTP. You create recipient(s) associated
to the SMTP or FTP server you have associated to the GSM/GPRS.
Working with a manual connection
, first the RTU establishes the connection and sends the
mail and/or files. Then it stops the connection.
If the connection was already established, the RTU maintains the connection.
Working with an automatic connection
, the mail and/or files are sent immediately and the
connection is maintained.
GPRS IP settings
GPRS represents a TCP/IP connection using GSM network. It then requires a TCP/IP
configuration.
Obtain IP address
automatically:
You work with dynamic IP
address which is provided by
the Operator at the
connection.
Use IP address:
You work with fix IP
address; it corresponds to
the SIM card you use.
Obtain DNS server
addresses auto.:
The Operator provides you
with DNS.
Use DNS Server
addresses:
You want to use specific
DNS addresses.
To Next Page
Loading...