Configuration of sensor using service adapter
/ Hardware requirements
DUT-E fuel level sensors. Operation manual. Version 8.1
© Technoton, 2020 47
3.2 Hardware requirements
For work with Service DUT-E software, you need a separate PC (desktop or laptop) on which
only Technoton service software that meets the following minimal requirements is installed:
• Windows XP/Vista/7/8/8.1/10 operating system of X32/X64 bit depth;
• CPU — Intel Core i3, dual-core, 2.0 GHz;
• RAM — 4 Gb;
• availability of USB 2.0 port;
• display resolution 1366x768.
ATTENTION: Service adapter operation is possible only after preliminary installation
of USB driver.
To Next Page
Loading...