Technoton DUT-E AF - Revision History

Revision history
DUT-E fuel level sensors. Operation manual. Version 8.1
© Technoton, 2020 5
Revision history
Versio
n
Date
Editor
Description of changes
1.0
01.2007
Basic version.
7.0
04.2016
OD
• New design of measurement head of DUT-E.
• Changes in delivery set of DUT-E, MK DUT-E.
• Addition and updates to description of installation of DUT-E.
• Changes in description of Service software.
• New packaging of DUT-E.
• Methodology of thermal correction coefficient calculation
added.
• International certificates ISO 9001:2015 (DaKKs)
and Customs Union added.
8.0
01.2017
OD
• Instructions on S6 SK operation while configuring
DUT-E CAN added.
• Schemes of connection of DUT-E CAN to PC via S6 SK added
(including scheme of sensors for configuration within
S6 interface).
• Terminology updated.
• Operation instructions for software Service DUT-E updated.
• New accessories for DUT-E added.
8.1
02.2020
OD
1) Updated:
- currently valid certificates;
- composition of DUT-E and MK DUT-E delivery sets;
- diagrams of sensors connection to the PC with
S6 SK service adapter;
- minimum requirements for PC for work with
Service DUT-E software;
- examples of diagrams of DUT-E CAN connection
to the Telematics terminal;
- document terminology.
2) Information added on:
- sensors models codes;
- sensors electromagnetic compatibility;
- taking into account the dead zone while creating the tank
calibration table;
- additional sensors accessories.
3) The structure of the document external links is introduced.