Maintenance / General instructions
DUT-E fuel level sensors. Operation manual. Version 8.1
© Technoton, 2020 96
7 Maintenance
7.1 General instructions
DUT-E visual inspection and operation check is recommended at least once per year.
IMPORTANT: it is recommended to periodically (once per year) check calibration of
sensor for minimum and maximum values of fuel level (given the shape of fuel tank
was not changed). In case of incorrect values, make calibration once again according
to 3.10.3*. Repeated calibration of fuel tank of Vehicle in this case is not needed.
DUT-E repair works are carried out only by certified Regional Service Centers
(hereinafter, RSCs). Full RSCs list can be found at https://www.jv-technoton.com/.
* DUT-E AF/232/485/CAN models. Repeated calibration of sensor for minimum and
maximum values for DUT-E A5/A10/F/I is done only by RSC.
To Next Page
Loading...