Technoton DUT-E AF - Additional Accessories

Accessories / Additional accessories
DUT-E fuel level sensors. Operation manual. Version 8.1
© Technoton, 2020 92
5.5 Additional accessories
Additional accessories may be required for DUT-E mounting on a Vehicle (see table 19).
Table 19 — DUT-E Additional accessories
View
Name
Description
Application
Filter DUT-E
Screen filter
For protecting
electrodes (tubes)
against water and
mud in tanks’ bottom
Catch DUT-E
Bottom-stop
To enhance sensor
mounting rigidity
FTP DUT-E
Fuel tank plug
Bayonet plug for
temporary sensor
replacement
Plug
Plug for sensor
mounting hole
To plug fuel tank
opening
DUT-E WP-11
Adaptor plate with
4 holes
To mount the
sensor in the tank in
the place for the
Omnicomm sensor
SAE 5 bolt
Mounting plate
Mounting plate with
SAE 5 bolt standard
bore position
DUT-E FP CT
Mounting plate for
barrel-shaped tanks
Mounting plate for
sensors installation
on barrel-shaped fuel
tanks
DUT-E TAM-d105
Mounting plate
Special duralumin
mounting plate for
6 screws
DUT-E WP-10
Wedge-shaped
fastening plate
Fastening plate for
sensors installation
on fuel tanks with
inclined surface
(10-degree angle)