Maintenance / Examination
DUT-E fuel level sensors. Operation manual. Version 8.1
© Technoton, 2020 98
7.3 Examination
Since DUT-E is demounted conduct a visual examination to detect the following defects:
• visible damages of the sensor head body, measuring probe, interface cable, cable;
• backlash of measuring unit tubes relative to each other and/or the body;
• presence of mud or paraffin between the tubes of the measuring probe;
• damage of the plastic mounting plate and traces of fuel leaks through the rubber gasket
of the mounting plate.
Contact RSC (see 7.1) or Manufacturer if the defects detected.
To Next Page
Loading...