Technoton DUT-E AF - Settings

To Next Page

To Previous Page

Configuration of sensor using service adapter / Vertical menu description / Settings - Interface

DUT-E fuel level sensors. Operation manual. Version 8.1

3.10.8 Settings - Interface

Interface module (see figure 53) provides selection of baud rate for RS-232 (for DUT-E 232),

RS-485 (for DUT-E 485) and K-line (for DUT-E CAN/AF) connections out of drop-down list:

• 4800 bit/s;

• 9600 bit/s;

• 19200 bit/s.

Figure 53 — Interface setting

Technoton DUT-E AF - Settings - Interface