Configuration of sensor using service adapter /
Service adapter connection
/ Operation restrictions
DUT-E fuel level sensors. Operation manual. Version 8.1
© Technoton, 2020 58
3.5.2 Operation restrictions
Avoid the following when connecting service adapter to the sensor mounted into the fuel tank
of the Vehicle:
• ingress of fuel and lubricants and moisture to the contact pins of adapter slots or
connectors of cables;
• potential damage of the adapter and cables by the rotating and heating elements of the
engine.
ATTENTION: To avoid any service adapter faults in communication between PC and
sensor make sure there are no sources of electromagnetic interference close to the
workplace (running electric motors, welding equipment, high-power transformers,
power lines, etc.).
To Next Page
Loading...