TDS 340A, TDS 360 & TDS 380 User Manual
D–1
Appendix D: General Care and Cleaning
General Care
Protect the oscilloscope from adverse weather conditions. The oscilloscope is not
waterproof.
CAUTION. To avoid damage to the oscilloscope, do not expose it to sprays,
liquids, or solvents.
Cleaning
Inspect the oscilloscope as often as operating conditions require. To clean the
oscilloscope exterior, perform the following steps:
1. Remove loose dust on the outside of the oscilloscope with a lint-free cloth.
Use care to avoid scratching the clear plastic display filter.
2. Use a soft cloth or paper towel dampened with water to clean the oscillo-
scope. You can use a 75% isopropyl alcohol solution for more efficient
cleaning.
CAUTION. To avoid damage to the surface of the oscilloscope, do not use any
abrasive or chemical cleaning agents.
To Next Page
Loading...
Need help?
General
