Tektronix TDS 340A

Using the File System
TDS 340A, TDS 360 & TDS 380 User Manual
3–57
Figure 3–36: File system — Labelling menu
To copy a file or directory, turn the general purpose knob until it scrolls the
cursor over the name of the file to copy. Then, press the side menu button Copy.
The file menu reappears with the names of directories to copy to. Select a
directory and press the side-menu button Copy <name> to Selected Directory.
To copy all files, select the *.* entry.
The oscilloscope copies all directories recursively. That means it copies both the
directory and all its contents.
To print a file, turn the general purpose knob until it scrolls the cursor over the
name of the file to print. Then, press the side-menu button Print.
The Print-To side menu should appear. Select the port to print to from GPIB,
RS-232, or Centronics. (See Figure 3–36.) Then the oscilloscope sends the file in
its raw form out the port. The device (printer) receiving the file must be capable
or printing the particular file format.
To create a new directory, press the side-menu button Create Directory.
The labelling menu appears. Turn the general purpose knob or use the main-
menu arrow keys to select each letter. Press Enter Char from the main menu to
enter each letter. When you have entered the name, press the side-menu button
OK Accept. (See Figure 3–36.)
Copying a File or
Directory
Printing a File
Creating a Directory