Tektronix TDS 340A User Manual

TDS 340A, TDS 360 & TDS 380 User Manual
3–59
Using the Utility Menu
The utility menu is actually four menus in one. Access these menus by pressing
the UTILITY button (Figure 3–37) and then the leftmost main-menu button. The
pop-up menu (see Figure 3–38) shows these options.
H The Config menu offers Tek Secure (which overwrites all setup and
reference memories) and the software version identifier as main menu
selections.
H The I/O menu (Option 14 instruments only) pertains to making hardcopies
(see page 3–41) and remote operations (refer to the TDS 340A, TDS 360 &
TDS 380 Programmer Manual).
H The Cal menu, which you should only use in conjunction with the adjust-
ment procedures.
H The Diag menu, which you should only use in conjunction with the Self
Test.
Utility
Figure 3–37: The UTILITY button

Tektronix TDS 340A Specifications

General

Brand	Tektronix
Model	TDS 340A
Category	Test Equipment
Language	English