Commands
TDS5000B Series Service Manual
5-23
DIAg:ITEM:FAILURES? 2
This query might return
:DIAG:ITEM:FAILURES 2,0
This indi cates there were 0 failures for item 2.
DIAg:ITEM:NAMe?
This query-only command returns the name of t he selected menu item. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Subsyst em, Area and Test settings.
This query can be issued while diagnostics are sti l l in progress.
DIAg:ITEM?, DIAg:ITEM:FAILUR ES?, DIAg:ITEM:RESULT?,
DIAg:ITEM:SUBITEMS?
DIAg:ITEM:NAMe? <NR1>
<NR1> sets the index item about which data wi l l be returned, which ranges from
0 through 15.
DIAg:ITEM:NAMe? 2
This query might return
:DIAG:ITEM:NAME 2,“Acquisition”
This indi cates that the selected menu item (2) is Acquisition.
DIAg:ITEM:RE SULT?
This query-only command returns the result from the last execution of the item.
This command i s equivalent to selecting Instrument Diagnostics from t he
Utilities menu and then reviewing the Diagnostic Status.
This query can be issued while diagnostics are sti l l in progress.
DIAg:ITEM?, DIAg:ITEM:NAMe?, DIAg:ITEM:FAILURES?,
DIAg:ITEM:SUBITEMS?
Example
Related Commands
Syntax
Arguments
Example
Related Commands
To Next Page
Loading...
