Commands
5-24
TDS5000B Series Service Manual
DIAg:ITEM:RESULT? <NR1>
<NR1> sets the index item about which data wi l l be returned, which ranges from
0 through 15.
DIAg:ITEM:RESULT? 2
This query might return
:DIAG:ITEM:RESULT 2,“Pass”
indicating that the item passed during t he last execution.
DIAg:ITEM:RESULT? 2
This query might return
:DIAG:ITEM:RESULT 2,“Fail”
indicating that the item failed during the last execution.
DIAg:ITEM:RESULT? 2
This query might return
:DIAG:ITEM:RESULT 2,“”
indicating that the item was not run.
DIAg:ITEM:S UBITEMS?
This query-only command returns the number of sub-items associated with the
item. This command i s equivalent to selecting Instrument Diagnostics from the
Utilities menu, choosing the Subsystem, Area or Test setting, and then reviewing
the resulting sub-items.
This query can be issued while diagnostics are sti l l in progress.
DIAg:ITEM?, DIAg:ITEM:NAMe?, DIAg:ITEM:FAILURES?,
DIAg:ITEM:RESULT?
DIAg:ITEM:SUBITEMS? <NR1>
Syntax
Arguments
Example 1
Example 2
Example 3
Related Commands
Syntax
To Next Page
Loading...
